Pacific UPC-32 Operation Manual page 62

SECTION 4 OPERATION
4.5.1.1 PROGRAM EXAMPLE (cont)
Press 108, ENTER, 108, ENTER, 108, ENTER, to select 108 volts line to neutral on all three phases.
PROGRAM: #4
FREQ=400
#SEGS=0
Press 1 ENTER 1 ENTER 1 ENTER to select WaveForm 1 on all three phases.
PROGRAM: #4
FREQ=400
#SEGS=0
Press ENTER to select default maximum Ilim for this Power Source.
PROGRAM: #4
FREQ=400
#SEGS=0
Press 120 ENTER 240 ENTER to select 120º phase shift for phase B and 240º phase shift for phase C
referenced to phase A.
PROGRAM: #4
FREQ=400
#SEGS=0
Press EXECUTE to execute this new program. The V/I METER display will become active.
V/I METER:
FREQ=400.0
SENSE=INT
PROGRAM #4
FORM=3 COUPLING=DIRECT
Va=108 Vb=108
WFa=1 WFb=1
Ilim=50 PHb=120º
FORM=3 COUPLING=DIRECT
Va=108 Vb=108
WFa=1 WFb=1
Ilim=50 PHb=120º
FORM=3 COUPLING=DIRECT
Va=108 Vb=108
WFa=1 WFb=1
Ilim=50 PHb=120º
FORM=3 COUPLING=DIRECT
Va=108 Vb=108
WFa=1 WFb=1
Ilim=50 PHb=120º
Va=108.0 Vb=108.0
Vab=187.1 Vbc=187.1 Vca=187.1
Ia=00.0 Ib=00.0
50
Vc=108
WFc=1
PHc=240º
Vc=108
WFc=1
PHc=240º
Vc=108
WFc=1
PHc=240º
Vc=108
WFc=1
PHc=240
Vc=108.0
Ic=00.0