Remote Interface Function Reference - Pacific UPC-32 Operation Manual

REMOTE INTERFACE FUNCTION REFERENCE

This is a quick reference to commonly used REMOTE INTERFACE functions and will aid the user in
quickly finding the functions of interest.
FUNCTION
CALIBRATE METERING
CALIBRATE PROGRAMMABLE OUTPUT IMPEDANCE
CLOSE / OPEN OUTPUT CONTACTOR
CREATE A PROGRAM
CREATE A TIME BASED TRANSIENT
CREATE A CYCLE BASED TRANSIENT
DELETE A PROGRAM
DOWNLOAD A METERED WAVEFORM - REMOTE INTERFACE
DOWNLOAD / UPLOAD A STORED WAVEFORM REMOTE INT.
ERASE ALL RAM AND RESET CPU
EXECUTE A PROGRAM
EXECUTE A TRANSIENT
READ HARMONIC SPECTRUM
READ OUTPUT POWER
READ OUTPUT POWER FACTOR
READ OUTPUT CURRENT CREST FACTOR
READ OUTPUT VOLTAGE
READ OUTPUT FREQUENCY (INDICATOR)
READ OUTPUT CURRENT
SELECT LOCAL or REMOTE OPERATION
SELECT METERING SENSE POINT (INTERNAL, EXTERNAL)
SET CSC (CONTINUOUS SELF CALIBRATION)
SET GPIB DEVICE ADDRESS
SET MIN/MAX FREQUENCY RANGE
SET OUTPUT POWER FORM
SET OUTPUT CURRENT LIMIT
SET OUTPUT PHASE ANGLES
SET OUTPUT COUPLING (XFMR OR DIRECT)
SET OUTPUT FREQUENCY
SET FREQUENCY LIMITS
SET OUTPUT VOLTAGE
SET VOLTAGE LIMITS
SET OUTPUT WAVEFORM
SET PROGRAMMABLE OUTPUT IMPEDANCE
SET TRANSITION TIME
SECTION 1
vii
GENERAL
SECTION
5.6
5.4.1
5.7.5
5.3, 5.7.1
5.3, 5.7.1
5.3, 5.7.1
5.3.3
5.7.7
5.4.3
5.3.3
5.4.1, 5.7.3
5.4.1, 5.7.4
5.5.2
5.5.2, 5.7.6
5.5.2, 5.7.6
5.5.2, 5.7.6
5.5.2, 5.7.6
5.5.2, 5.7.6
5.5.2, 5.7.6
5.1
5.4.2
5.4.2
4.6.3.3
5.4.1
5.4.2
5.4.1
5.4.1
5.4.2
5.4.1
5.4.1
5.4.1
5.4.1
5.4.1
5.4.1
5.4.1