Ieee-488.1 Interface Functions - Pacific UPC-32 Operation Manual

5.6.1 IEEE-488.1 INTERFACE FUNCTIONS

The following lists the IEEE-488.1 capabilities of the UPC. Refer to the ANSI/IEEE-488.1 1987 standard
for more information.
FUNCTION MNEMONIC
SH1
AH1
T6
L3
SR1
RL1
DC1
DT1
PP0
C0
E1
IFC
REMOTE MESSAGE RECEIVED / Description
Source handshake functions
Acceptor handshake functions
MTAnn - Talker subset 6. nn is GPIB device address 0-30
MLAnn - Listener subset 3. nn is GPIB device address 0-30
Service request/Serial Poll functions
SPE - Serial Poll Enable
SPD - Serial Poll Disable
Local/Remote functions
GTL - Go To Local
LLO - Local Lockout
Device clear functions
DCL - causes a hardware RESET of the UPC
SDC - Same as DCL but device must be addressed
Device Trigger function
GET - Group Execute Trigger message executes Transient Events (if
any), of currently executed program
No Parallel Poll functions
No Controller functions
Electrical interface Type 1
InterFace Clear (IFC) sets the UPC IEEE-488 bus interface to an idle
state. The data input and data output buffers remain unchanged
97
SECTION 5 REMOTE OPERATION