How To - Pacific UPC-32 Operation Manual

SECTION 1
HOW TO... FRONT PANEL REFERENCE
This is a quick reference to commonly used FRONT PANEL functions and will aid the user in quickly
learning how to use functions of interest.

HOW TO

CALIBRATE METERS
CALIBRATE PROGRAMMABLE OUTPUT IMPEDANCE
CHANGE OPERATING MODES
CLOSE / OPEN OUTPUT CONTACTOR
COPY A WAVEFORM
COPY A PROGRAM
CREATE A TIME BASED TRANSIENT
CREATE A CYCLE BASED TRANSIENT
CREATE A PROGRAM
DELETE A PROGRAM
EDIT A WAVEFORM
EDIT A PROGRAM
EDIT A TRANSIENT
ERASE ALL RAM AND RESET CPU
EXECUTE A PROGRAM
EXECUTE A TRANSIENT
QUICKLY PUT THE UNIT TO USE
READ HARMONIC SPECTRUM
READ OUTPUT POWER
READ OUTPUT POWER FACTOR
READ OUTPUT CURRENT CREST FACTOR
READ OUTPUT VOLTAGE
READ OUTPUT FREQUENCY (INDICATOR)
READ OUTPUT CURRENT
SELECT LOCAL or REMOTE OPERATION
SELECT METERING SENSE POINT (INTERNAL, EXTERNAL)
SET CSC (CONTINUOUS SELF CALIBRATION)
SET BAUD RATE FOR RS-232 SERIAL INTERFACE
SET DISPLAY BACKLIGHT INTENSITY
SET DISPLAY VIEW ANGLE
SET GPIB DEVICE ADDRESS
SET MIN/MAX FREQUENCY RANGE
SET OUTPUT POWER FORM
SET OUTPUT CURRENT LIMIT
SET OUTPUT PHASE ANGLES
SET OUTPUT COUPLING (XFMR OR DIRECT)
SET OUTPUT FREQUENCY
SET FREQUENCY LIMITS
SET OUTPUT VOLTAGE
SET VOLTAGE LIMITS
SET OUTPUT WAVEFORM
SET PROGRAMMABLE OUTPUT IMPEDANCE
SET SLEW RATES
SET TRANSITION TIME
GENERAL
vi
SECTION
8.3
4.6.3.1.1
4.1.1
4.1.2 steps 6,7
4.6.2.2
4.6.1.1
4.5.2.1
4.5.2.2
4.5.1.1
4.6.1.2
4.6.2.1
4.5.1
4.5.2
4.6.1.3
4.4.1
4.4.2
4.1.2
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
5.1
4.6.3.1
4.6.3.1
10.4
4.6.3.2
4.6.3.2
4.6.3.3
4.6.3.1
4.5.1.1
4.5.1.1
4.5.1.1
4.5.1.1
4.1.2, 4.3.3, 4.5.1.1
4.6.3.1
4.1.2, 4.3.2, 4.5.1.1
4.6.3.1
4.5.1.1
4.6.3.1
4.6.3.6
4.6.3.1