Introduction - Pro Spot PHS-101 Instruction Manual

2.0
Congratulations on acquiring your New Hybrid Spot Welder!
Team Pro Spot looks forward to supporting you.
You have a welder and support group that will increase your productivity. The integrated features, ease of
use, speed and quality welds that your Hybrid Spot o ers will become an important part of your business.
The following information will be needed when you call Pro Spot:
*MODEL TYPE: Hybrid Spot
*SERIAL NO:______________ (The serial number is located on the back of the unit)
For Parts or service contact your local distributor,
Local Number: ____________________________
or in the U.S. call toll free: 1-877 PRO SPOT or 1-760-407-1414
for a customer service representative.
Visit Pro Spot Online: my.prospot.com Email: info@prospot.com
NOTE: You can now order parts online at: prospot.com/store/
_________________________________________________________________________________________
The Hybrid Spot welder is used by body shops to
duplicate the welding procedure used by the car
manufacturers. Use of the equipment that is contrary
to the instructions in this manual can cause personal
injury and/or machine damage.
Pro Spot International, Inc. can in no way be held
responsible for intentional or unintentional damage,
and consequent unlimited loss of pro t, loss of
income, loss of business opportunity, loss of use, etc.
that originates from incorrect use of this equipment
in its use in a manner not intended.
Warranty
Pro Spot International, Inc. o ers a two-year
guarantee on the welder from the date of delivery.
This guarantee covers material defects and assumes
normal care and maintenance.
The guarantee assumes that:
• the equipment is correctly installed and inspected
• the equipment has not been altered or rebuilt without
approval from Pro Spot International, Inc.
• genuine Pro Spot International, Inc. spare parts are used to
make repairs.
• operation and maintenance has been carried out according
to the instructions in this manual.
All claims on warranty must verify that the fault has occurred
within the guarantee period, and that the unit has been used
within its operating range as stated in the speci cations. All
claims must include the product type and serial number.
This data is stamped on the name plate.
8

INTRODUCTION

NOTE: This instruction manual provides instructions
for installation, operation, maintenance and
troubleshooting.
__________________________________________
not neglect to do this as improper handling may result in
personal injury and damage to the equipment.
__________________________________________
du soudeur. Ne négligez pas de le faire puisque une manvaise
manipulation peut conduire aux blessures et dommages à
l'équipement.
___________________
The drawings in this manual are presented for illus-
trative purposes only and do not necessarily show
the design of the equipment available on the market
at any given time. The equipment is intended for use
in accordance with current trade practice and appr-
opriate safety regulations. The equipment illustrated
in the manual may be changed without prior notice.
The contents in this publication can be changed
without prior notice.
This publication contains information that is prot-
ected by copyright laws. No part of this publication
may be reproduced, stored in a system for information
retrieval or be transmitted in any form, in any manner,
without Pro Spot International, Inc.'s written consent.
All Info Copyright © Pro Spot International Inc.
IMPORTANT! Read this manual carefully to become
familiar with the proper operation of the welder. Do
IMPORTANT! Lisez ce Mode d'Emploi attentivement
a n de vous familiariser avec le bon fonctionnement
_______________________