Introduction - Pro Spot AL-5 Instruction Manual

Capacitor discharge aluminum dent pulling system

Hide thumbs Also See for AL-5:

Table of Contents

1.0

Congratulations on aquiring your new PRO SPOT AL-5 Welder!

Team Pro Spot looks forward to supporting you.

The following information will be needed when you call Pro Spot.

* MODEL TYPE: AL-5

* SERIAL NO:

The serial number is located on the back of the unit.

For parts or service contact your local distributor,

Local Number:_____________________________

or in the U.S. call: Toll Free: 1-877 PRO SPOT or 1-760-407-1414

for a customer service representative.

Visit Pro Spot On-Line: www.prospot.com

NOTE: You can now order parts online at prospot.com/store/

Pro Spot's AL-5 Capacitor Discharge Stud Welder is designed for aluminum dent pulling but can also be used

with steel studs for welding to UHSS panels with no or very little heat applied to the panels. The welder is

very easy to use and is controlled by one knob to adjust weld power. The welder auto detects the line

voltage 110/240 VAC.

NOTE: This instruction manual provides advice as well as instructions for installation, operation, maintenance

and troubleshooting.

IMPORTANT! Read this manual carefully to become familiar with the proper operation of the welder.

Do not neglect to do this as improper handling may result in personal injury and damage to the

equipment.

IMPORTANT! Lisez ce Mode d'Emploi attentivement a n de vous familiariser avec le bon

fonctionnement du soudeur. Ne négligez pas de le faire puisque une mauvaise manipulation peut

conduire aux blessures et dommages à l'équipement.

The drawings in this manual are presented for illustrative purposes only and do not necessarily show the

design of the equipment available on the market at any given time. The equipment is intended for use in

accordance with current trade practice and appropriate safety regulations. The equipment illustrated in the

manual may be changed without prior notice.

The contents in this publication can be changed without prior notice.

This publication contains information that is protected by copyright laws. No part of this publication may be

reproduced, stored in a system for information retrieval or be transmitted in any form, in any manner

without Pro Spot International, Inc. ' s written consent.

Conformity with directives and standards: AL-5 complies with UL, EN, and CE Standards.

Introduction

Email: info@prospot.com

Table of Contents