Putting The Unit Into Operation; Functional Elements; Touch Display; Color Status Of The Light Strip - Dentsply Sirona Primeprint Instructions For Use Manual

5 Commissioning

5.3 Putting the unit into operation

40
Putting the unit into operation
5.3
5.3.1

Functional elements

5.3.1.1

Touch display

A Unit status
B Material unit management
C Configuration
These operating instructions describe how to operate the unit by
executing and confirming commands via the touch display. All inputs
that are required on the unit can be made here.
5.3.1.2

Color status of the light strip

The LED light strip can display various statuses of the unit.
LED light strip
White
Yellow
Continuous illumination
Green
Slowly flashing
Green
x% progress
Rest is white
Green
100% lit
Yellow
Flashing at x%
Red
Flashing at x%
Yellow
Rapidly flashing
Red
Continuous illumination
Color of your choice, ex-
cept blue, red, green, yel-
low, white
Pulsating
Instructions for Use Primeprint
Operating status
Unit ready for operation
Door closed
Unit ready for operation
Door open
Unit ready for operation
All elements available for job
Processing is in progress
Processing concluded in a controlled
manner
Process interrupted with Stop
Process interrupted because of error
Unit is switching off
Internal error,
restart necessary
Unit in Idle mode
D3691.201.01.01.02 04.2021
Dentsply Sirona
67 45 1 73 D3691