Commissioning; Putting The Inlab 4 Pc Into Operation; Startup Prerequisites; Required Accessories - Dentsply Sirona Primeprint Instructions For Use Manual

5 Commissioning

5.1 Putting the inLab 4 PC into operation

MSI MSI MSI MSI
Example of monitor cable converter
34
5
Commissioning
Putting the inLab 4 PC into operation
5.1
Observe the following steps in order to put the unit into operation using
the inLab 4-PC (optional).
5.1.1

Startup prerequisites

5.1.1.1

Required accessories

Supplied parts:
● inLab PC with power cable
● Keyboard
● Mouse
● Power cable
● Ethernet cable for connection of the machine with the PC.
Also required:
● PC monitor including corresponding monitor connection cable, such
as VGA, DVI, HDMI or display port cable (not included in scope of
supply)
CAUTION
Image may not display
Note the required minimum monitor resolution of 1920 x 1080 at
70 Hz. Refer to the technical documentation of the monitor for the
correct resolution and frame rate settings.
Recommendation:
● Sirona inLab system PC monitor, Order No.: 60 42 548 D3446
Depending on the connection type of the monitor, the monitor cable
converters must be used (not included in scope of supply).
Dentsply Sirona
Instructions for Use Primeprint
67 45 1 73 D3691
D3691.201.01.01.02 04.2021