Product-Specific Safety Instructions; Material-Specific Safety Instructions - Dentsply Sirona Primeprint Instructions For Use Manual

Dentsply Sirona
Instructions for Use Primeprint
67 45 173 D3691
D3691.201.01.01.02 04.2021

Product-specific safety instructions

2.7
CAUTION
Status LED illuminated in red
In the event of any faults, the status bar lights up red.
➢ Turn off the machine at the main switch before you reach into the
processing area. You can restart the machine once the error is
eliminated.
CAUTION
Do not use the component
In rare cases where the component falls from the build platform, it is
recommended to carefully remove the component from the Primeprint
unit or the transport container using the tweezers supplied with the
Primeprint PPU.
Because it cannot be excluded that the component has not been fully
printed, this component must not be used.
CAUTION
Do not use faulty printed objects
Faulty printed objects must not be used.

Material-specific safety instructions

2.8
CAUTION
Handling printed materials
For general handling of the printed materials, please refer to the
safety data sheet of the manufacturer. The materials must be handled
properly and in compliance with all manufacturer's specifications and
local legal requirements.
Independent of the specific requirements in the safety data sheet of the
material, we recommend wearing protective goggles, protective clothing
and gloves during maintenance and cleaning.
2 Safety instructions
2.7 Product-specific safety instructions
19