Build Chamber - Dentsply Sirona Primeprint Instructions For Use Manual

Dentsply Sirona
Instructions for Use Primeprint
67 45 173 D3691
D3691.201.01.01.02 04.2021
3.4.1.3

Build chamber

CAUTION
Risk of burning
The Primeprint 3D printer uses a heating system integrated into the
build chamber. Make sure that you do not touch this when loading
and or unloading with the material unit or when reaching into the build
chamber.
The areas marked in red in the adjacent figure become hot.
A Material unit (inserted)
B Locking mechanism of the
material unit
3 General information on the device
3.4 Technical description (component and interfaces)
C Primeprint box (inserted)
A
B
C
25