Repacking; Storage - Dentsply Sirona Primeprint Instructions For Use Manual

Dentsply Sirona
Instructions for Use Primeprint
67 45 173 D3691
D3691.201.01.01.02 04.2021

Repacking

4.6
ü The Primeprint material unit is removed.
ü The Primeprint box is removed.
ü The main switch on the back side of the unit is set to the 0 (OFF)
position.
1. Disconnect the power cable and the connecting cable from the back
side of the unit and stow them away.
2. Check the unit for completeness according to the scope of supply!
3. Pack the unit securely and use the transport locks provided.
4.7

Storage

Store the unit in a closed and dry room at a temperature of -10°C to
50°C for a maximum period of 12 months.
4 Transportation and installation
4.6 Repacking
33