Configuring The Device - Dentsply Sirona Primeprint Instructions For Use Manual

Dentsply Sirona
Instructions for Use Primeprint
67 45 173 D3691
D3691.201.01.01.02 04.2021
5.3.6.2

Configuring the device

In the "Machine and Instrument tray Management" software "inLab
CAM" area you can make subsequent amendments to the various
settings for your unit.
1. Click the "Configuration" button in the system menu.
2. Click on the "Machine and Instrument tray Management" button.
3. Click on the unit that you wish to configure.
5.3.6.2.1 Primeprint – Editing device settings
Using the touch display, you can change or view the following settings
subsequently via menu item "Settings" :
● Language setting
● Sound and light settings
● IP settings
– Automatic IP setting
– Manual IP settings
– Display of the MAC address
● Configuring DS hub connections
● Firmware download
5.3.6.2.1.1 Device settings
Manual IP settings
The IP address can be changed in order to integrate the machine into
existing networks. To do this, proceed as follows:
1. Establish a direct connection to the inLab 6 PC (see Installing the
unit [→ 43]).
2. If you want to change the static IP address, click "Edit Device
Settings" .
3. Enter the network settings in accordance with your local network
configuration.
4. Confirm the new network settings with "Ok" or press "Cancel" in
order not to save the changed settings.
5. Disconnect the Ethernet connection with the PC and connect the
machine to the network socket in your local network (see
Connecting the PC/interfaces).
Auto IP settings
There is an option for integrating the machine into an existing network
with DHCP server in such a way that the IP address is received by the
DHCP server automatically. To do this, proceed as follows:
1. Establish a direct connection to the inLab 6 PC (see Installing the
unit [→ 43]).
2. If you want to change the IP address to automatic addressing, click
"Edit Device Settings" .
3. Now click "Auto IP settings" .
IMPORTANT
Ensure that the network in which you are integrating the machine has
an active DCHP server for the allocation of IP addresses.
5 Commissioning
5.3 Putting the unit into operation
45