Check Point QUANTUM MAESTRO Manual page 33

System Status LED Behavior
LED
Instructions
Behavior
Steady The Orchestrator is up and
green running normally.
Flashing The Orchestrator is booting
green up.
Steady red Major error occurred.
For example, the Orchestrator
overheated, has a corrupted
firmware, there is a CPU error.
Flashing for Software did not boot properly,
more than and only firmware is running.
five minutes
Action Required
None.
Wait for up to five minutes for the end of the booting
process.
Check environmental conditions (room
temperature).
It may take up to five minutes to power on the
Orchestrator.
If the System Status LED is lit steady red for five
minutes after you started the Orchestrator, unplug
the Orchestrator and contact
Connect to the Orchestrator through the console
port and check the software status.
Quantum Maestro Getting Started Guide | 33
LEDs
Check Point Support
.