Check Point QUANTUM MAESTRO Manual page 79

Step 7: Initial Power On
The power cords should be standard 3-wire AC power cords including a safety ground and rated for 15A
or higher.
Check all boards, power supplies, and fan tray modules for proper insertion before plugging in a power
cable.
The Quantum Maestro Orchestrator powers on automatically, when an AC power is applied.
Step Instructions
1 Plug in the first power cable to the first PSU.
2 Plug in the second power cable to the second PSU.
3 Wait for the
It can take up to five minutes to power on the Quantum Maestro Orchestrator.
If after five minutes the
contact
4 Check the status of the Quantum Maestro Orchestrator LEDs (see
page 31
All of the LEDs must show status lights that are consistent with normal operation (initially
flashes, and then lights in a steady color).
Orchestrator
Model
MHO-170
MHO-140
Mounting the Quantum Maestro Orchestrator MHO-140 and MHO-170 in a Rack
System Status LED
System Status LED
Check Point Support
.
).
to turn green (see "System Status LED" on page 32
is lit in red color, unplug the power cords and
Expected State of System LEDs
Five Minutes After Power On
Quantum Maestro Getting Started Guide | 79
).
"LED Notifications" on