Siemens 8DA10 Series Installation And Operating Instructions Manual page 98

Installation
98/214
Fig. 110: Removing the cover of the transformer housing
➭ Remove the cover of the transformer housing ① and the sealing ring ③ .
Fig. 111: Removing the cover of the transformer housing and
the sealing ring
➭ Undo 12 bolt-and-washer assemblies M8x40 at the cover of the panel connection
housing ④ .
Fig. 112: Removing the cover with the plug sockets
➭ Remove the panel connection housing ⑤ .
➭ Take the sealing ring ⑥ out of the groove in the cover of the panel connection housing.
Fig. 113: Removing the panel connection housing
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
① Transformer housing
② Cover of transformer housing
①
Cover of transformer housing
② Transformer housing
③ Sealing ring (O-ring)
④ Cover of panel connection housing
④ Cover of panel connection housing
⑤
Panel connection housing
⑥ Sealing ring