Installation Of End Walls - Siemens 8DA10 Series Installation And Operating Instructions Manual

Installation
142/214
32

Installation of end walls

As-delivered condition of panel:
Fig. 169: As-delivered condition
➭ Screw termination plate on loosely using bolts and contact washers (do not tighten yet).
Fig. 170: Fixing points for the termination plate
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
①
Hexagon head bolt M8x25
with cage nut (4x)
②
Bolt M6x20 (2x)
③ Bolt M8x25 (2x)
④
Use bolt M8x25 only for
a frame height 1020 mm