Siemens 8DA10 Series Installation And Operating Instructions Manual page 206

Servicing
①
Bearing for deflection lever (Shell Tellus Oil 32)
② Curve contour (Isoflex Topas L 32)
③
Closing latch (Isoflex Topas L 32)
⑥ Deflection of auxiliary switch (Isoflex Topas L 32)
⑦ Bearing of operating shaft (Shell Tellus Oil 32)
⑪ Guide of opening spring (Isoflex Topas L 32)
⑫ Crank pin for pushbutton operation (Isoflex Topas L 32)
206/214
➭ Renew the anti-corrosion protection greasing.
➭ Operate the circuit-breaker several times mechanically by hand for test.
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
④
Deflection of auxiliary switch (Isoflex Topas L 32)
⑤ Auxiliary switch (Shell Tellus Oil 32)
⑧ Opening latch (Isoflex Topas L 32)
⑨ Curve for opening latch (Isoflex Topas L 32)
⑩ Stop (Isoflex Topas L 32)