Siemens 8DA10 Series Installation And Operating Instructions Manual page 205

861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11
Fig. 219: Lubrication chart for 3AH49 operating mechanism
①
Bearing for deflection lever
② Curve contour
③
Closing latch
④ ⑥ Deflection of auxiliary switch
,
⑤
Auxiliary switch
⑦ Bearing of operating shaft
Contact by cleaning agents
Can cause property damage. Joints and bearings which cannot be dismantled may be
damaged by cleaning agents.
➭ Do not use cleaning agents to clean joints and bearings which cannot be dismantled.
Permissible lubricants:
For bearings, sliding surfaces:
For bearings that are inaccessible for
grease, and bearings of the auxiliary
switch S1:
⑧
Opening latch
⑨ Curve for opening latch
⑩
End stop
⑪ Guide of opening spring
⑫
Crank pin for pushbutton operation
NOTICE
Isoflex Topas L 32
Klüber - Lubrication KG
Geisenhauer Str. 7
Postfach 70 10 47
D-81310 Munich
Tellus Oil 32
Shell Direct GmbH
Suhrenkamp 71
D-22335 Hamburg
Servicing
205/214