861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11
21
Switchgear installation
Risk of injury due to inappropriate installation.
The activities described below must be performed professionally in order to minimize the
risk of injury.
➭ The switchgear must be assembled by certified personnel only
(see page 10, "Qualified personnel").
Fig. 39:
Busbar version up to 3150 A
The points the panels are interconnected at are called panel joints hereafter.
Precondition: The panels are standing in the switchgear room and are aligned for assembly
(see page 59, "Aligning the switchgear").
Principle: Repeat the following operations for all panels until final assembly.
WARNING
①
②
③
Installation
Panel joint
Fixed-mounted panel
Panel to be lined up
61/214