Sharp Change Of Direction In The Field; Normal Service Braking And Parking - Zetor UTILIX HT Series Operator's Manual

Sharp change of direction in the field

Allow the engine speed to return to idle, simultaneously
depress the clutch and apply the brakes.
When the tractor stops, lower the attached implement and
move the main transmission to the neutral position.
Apply the parking brake, stop the engine and remove the
ignition key.
Caution:Perform tight turns only at a slow safe speed. Doing so at a high speed can cause
rollovers and very serious injury or death.

Normal service braking and parking

Let the engine come back to idle and at the same time
push in the brake and brake simultaneously.
When the tractor has come to a halt, lower any implement
to the ground, and put the main gear in neutral. Apply the
park brake, stop the engine, and remove the key.
Caution: Always apply the park brake when parking. Failure to do so can cause accidents and
damage. As an extra precaution when parking on a slope, chock the rear wheels.
76
CONTROLS, INSTRUMENTS & OPERATIONS
U18NN050
U18N053