Disassembly Procedures
Overview
This chapter provides instructions on how to disassemble and reassemble the Propaq M unit,
and includes the following sections:
Required Equipment
•
Safety Precautions
•
Modules
•
Handle Disassembly
•
Main Unit Disassembly
•
Front Enclosure Disassembly
•
Display Disassembly
•
NIBP and EtCO
•
Monitor Board and SpO
•
Required Equipment
No. 1 Phillips screwdriver with torque capability
•
No. 2 Phillips screwdriver with torque capability
•
Exacto-knife
•
Orange wooden stick. (Available from H.A. Stiles: 1-800-447-8537)
•
90° dental pick
•
Needle nose pliers
•
6 mm socket wrench
•
26 mm socket wrench
•
Kapton tape
•
3M copper adhesive tape, or equivalent
•
9650-0804-01 Rev. A
Disassembly
2
Disassembly
2
ZOLL Propaq M Service Manual
Chapter 3
41