Return; Disposal; Software History; Contact Addresses Of Endress+Hauser - Endress+Hauser Fieldbus Levelflex M FMP43 Operating Instructions Manual

Levelflex M FMP43 with FOUNDATION Fieldbus
Endress+Hauser
9.5

Return

The following procedures must be carried out before a level transmitter requiring repair or
calibration, for example, is returned to Endress+Hauser:
• Remove all residues. Pay special attention to the grooves for seals and crevices which could
contain fluid residues. This is particularly important if the substance is hazardous to health, e.g.
flammable, toxic, caustic, carcinogenic, etc.
• Always enclose a duly completed "Declaration of contamination" form with the device (a copy of
the "Declaration of contamination" can be found at the end of these Operating Instructions). Only
then can Endress +Hauser transport, examine and repair a returned device.
• Enclose special handling instructions if necessary, for example a safety data sheet as per
EN 91/155/EEC.
Additionally specify:
• The chemical and physical characteristics of the fluid
• A description of the application
• A description of the error that occurred (specify error code if possible)
• Operating time of the device
9.6

Disposal

When disposing, separate and recycle the device components based on the materials.
9.7

Software history

Date Software version
07.2007 V 01.04.02
9.8

Contact addresses of Endress+Hauser

Contact addresses can be found on our homepage: www.endress.com/worldwide. If you have any
questions, please do not hesitate to contact your Endress+Hauser representative.
Software modifications
Original software.
Troubleshooting
Documentation
BA359F/00/en/07.07
71041165
BA245F/00/en/07.07
71040937
93