Foundation Fieldbus Communication - Endress+Hauser Fieldbus Levelflex M FMP43 Operating Instructions Manual

Operation
!
40
5.5

FOUNDATION Fieldbus communication

5.5.1 System architecture
The following diagram shows two typical examples of a FOUNDATION Fieldbus network with the
associated components.
1
ENDRESS + HAUSER
ENDRESS + HAUSER
VU331
%
– + E
Micropilot M
• FXA291/ToF Adapter FXA291
• FXA193
Fig. 3: FOUNDATION Fieldbus-HSE: High Speed Ethernet, FOUNDATION Fieldbus-H1: FOUNDATION Fieldbus-
H1, LD: Linking Device FOUNDATION Fieldbus-HSE/FOUNDATION Fieldbus-H1,
PS: Bus Power Supply, SB: Safety Barrier, BT: Bus Terminator
The system can be connected in the following ways:
– A linking device makes the connection to higher-order fieldbus levels (e.g. High Speed Ethernet (HSE)) possible.
– An FOUNDATION Fieldbus-H1 connecting card is needed for direct connection to a process control system.
Note!
Further information on FOUNDATION Fieldbus can be found in Operating Instructions BA013S
"FOUNDATION Fieldbus Overview, Installation and Commissioning Guidelines", the
FOUNDATION Fieldbus Specification or on the Internet at "http://www. fieldbus.org".
Levelflex M FMP43 with FOUNDATION Fieldbus
• ToF Tool - FieldTool Package
• FieldCare
- Profiboard/Proficard
PROFIBUS DP
Prosonic M
Levelflex M
• ToF Tool - FieldTool Package
• FieldCare
SPS / PLC / API
PROFIBUS PA
FHX40
Gammapilot M
L00-FMxxxxxx-14-00-06-xx-001
Endress+Hauser
T
VU331