Cleaning Of The Probe - Endress+Hauser Fieldbus Levelflex M FMP43 Operating Instructions Manual

Levelflex M FMP43 with FOUNDATION Fieldbus
Endress+Hauser
3.5

Cleaning of the probe

3.5.1 Cleaning of the probe in the tank
Installation close to tank wall
• By installing the probe close to the tank wall,
the cleaning effect is improved in cases where
a spray ball is used. The cleaning jet is
deflected against the tank wall and onto the
probe. This means that those parts of the
probe are cleaned which would normally not
be reached by the spray ball jet. If the probe is
positioned in this way, only one spray ball is
needed.
Installation in the center of the tank
• If the probe is mounted in the center of the
tank, it may be necessary to use a second spray
ball. The spray balls should then be mounted
to the left and right of the probe.
Installation
L00-FMP43xxx-17-00-00-xx-003
L00-FMP43xxx-17-00-00-xx-004
23