Function "Envelope Curve Display" (0E3) - Endress+Hauser Fieldbus Levelflex M FMP43 Operating Instructions Manual

Levelflex M FMP43 with FOUNDATION Fieldbus
Endress+Hauser
6.7

Function "envelope curve display" (0E3)

You can obtain the following information from the envelope curve display in this function:
envelope curve
minimum distance
mapping
substracted signal
Navigation in the envelope curve display
Using navigation, the envelope curve can be scaled horizontally and vertically and shifted to the left
or the right. The active navigation mode is indicated by a symbol in the top left hand corner of the
display.
quality of
full calibr. evaluated echo
distance of
of the plot evaluated echo
full calibr.
empty calibr.
...
Commissioning
evaluated echo
empty calibr. is marked
maximum distance
probe length of the plot
level echo
empty calibr.
level echo
probe length
Horizontal Zoom mode:
- h orizontal zoom in
- horizontal zoom out
Move mode:
- m oved to the left
- moved to the right
Vertical Zoom mode:
- vertical zoom (4 steps)
L00-FMPxxxxx-07-00-00-en-003
L00-FMPxxxxx-07-00-00-en-004
69