Endress+Hauser Fieldbus Levelflex M FMP43 Operating Instructions Manual page 32

Operation
32
5.1.1 General structure of the operating menu
The operating menu is made up of two levels:
• Function groups (00, 01, 03, ..., 0C, 0D):
The individual operating options of the device are split up roughly into different function groups.
The function groups that are available include: "basic setup", "safety settings.", "output",
"display", etc.
• Functions (001, 002, 003, ..., 0D8, 0D9):
Each function group consists of one or more functions. The actual operation or configuration of
the device takes place in the functions. Numerical values can be entered here and parameters can
be selected and saved. The available functions of the "basic setup" (00) function group include:
"tank properties" (002), "medium property" (003), "process propert." (004), "empty
calibr." (005), etc.
If, for example, the application of the device is to be changed, carry out the following:
1. Select the "basic setup" (00) function group.
2. Select the "tank properties" (002) function (where the existing tank shape is selected).
5.1.2 Identifying the functions
For simple orientation within the function menus, for each function a position is shown on the
display.
The first two digits identify the function group:
• Basic setup 00
• safety settings 01
• Linearization 04
...
The third digit numbers the individual functions within the function group:
• Basic setup 00
In the following section, the position is always given in brackets (e.g. "tank properties" (002))
after the function described.
Levelflex M FMP43 with FOUNDATION Fieldbus
→
• Tank properties
• Medium property
• Process propert.
...
L00-FMRxxxxx-07-00-00-en-005
002
003
004
Endress+Hauser