D Receiving A Polling Request Call; D Receiving A Test Call - Icom GM800 Instruction Manual

D Receiving a Pflling Request call
NOTE: When "Polling ACK" is set to "Auto," the
transceiver automatically replies to the call. In that
case, both the TX and RX calls are stored in the
Transmitted and Received Call Logs. (Default: Auto)
1. When a Polling Request call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• " " is displayed and "
Push [Alarm Off]
2. Select your desired action.
[Hold]: Push [Hold]
screen.
[ACK] Push [ACK]
acknowledgement.
[Accept]: Push [Accept]
Task mode.
L Rotate [CH/GRP] to confirm the call contents.
L See page 29 for details of the Software key
functions in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
TIP: See page 52 for details on sending an
acknowledgement.
" blinks.
to return to the Main
to send an
to enter the DSC
to return to the

D Receiving a Test call

NOTE: When "Test ACK" is set to "Auto," the
transceiver automatically replies to the call. In that
case, both the TX and RX calls are stored in the
Transmitted and Received Call Logs. (Default: Auto)
1. When a Test call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• " " is displayed and "
Push [Alarm Off] .
2. Select your desired action.
[Hold]: Push [Hold]
screen.
[ACK] Push [ACK]
acknowledgement.
[Accept]: Push [Accept]
Task mode.
L Rotate [CH/GRP] to confirm the call contents.
L See page 29 for details of the Software key
functions in the DSC Task mode.
3. Push [Standby Mode]
Standby mode
.
TIP: See page 53 for details on sending an
acknowledgement.
7
DSC OPERATION
" blinks.
Push
any
to return to the Main
to send an
to enter the DSC
to return to the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
66