Twisted Pair Ports; Table 3: At-X530-28Gtxm Switch Twisted Pair Port Specifications - Allied Telesis AlliedWare Plus x530 Series Installation Manual

Twisted Pair Ports

The specifications of the 24 twisted pair ports are listed in Table 3 for the
AT-x530-28GTXm switch, Table 4 on page 24 for the AT-x530-28GPXm
switch, Table 5 on page 25 for the AT-x530-52GTXm switch, and Table 6
on page 26 for the AT-x530-52GPXm switch.
Table 3. AT-x530-28GTXm Switch Twisted Pair Port Specifications
Specification
Port Speed
Duplex Mode
Maximum Distance
Connector
x530 Series Installation Guide for Stand-alone Switches
Description
Ports 1 - 20: 10 Mbps, 100 Mbps or 1
Gbps.
Ports 21 - 24: 100 Mbps or 1/2.5/5 Gbps.
Ports 1 - 20: Set the port speed manually
or with Auto-Negotiation at 10 Mbps and
100 Mbps.
Ports 21 - 24: The port speed is set with
Auto-Negotiation only, at 1 Gbps and
higher.
The default is Auto-Negotiation for all
ports.
Ports 1 - 20: Full- or half-duplex mode at
10 Mbps and 100 Mbps. Full-duplex only at
1 Gbps. Supports Auto-Negotiation at 10
Mbps and 100 Mbps.
Ports 21- 24: Full-duplex only at all speeds.
100 meters (328 feet).
8-pin RJ-45.
23