Table of Contents
Advertisement
Item
h) AnalogControl
GainSelector
Gain
GainAuto
BalanceWhiteAuto
AWBAreaSelector
AWBAreaEnable
AWBAreaEnableAll
AWBControlSpeed
AWBControlStatus
BlackLevelSelector
BlackLevel
Gamma
LUTMode
i) LUTControl
LUTSelector
LUTIndex
LUTValue
Setting range
Default value
0:
0:AnalogAll
AnalogAll,
1:DigitalRed,
2:DigitalBlue
AnalogAll, x1.0
AnalogAll x1.0 〜 x126.0
DigitalRed, x1.0
DigitalRed x0.447〜x5.624
DigitalBlue, x1.0
DigitalBlue x0.447〜x5.624
0:Off
0:Off
1:Once
2:Continuous
ー
0:Off
ー
0:Low Right
True, False
True
True, False
True
1 〜 8
4
ー
Idle
0:DigitalAll,
0:DigitalAll
1:DigitalRed,
3:DigitalBlue
DigitalAll, -133〜255
DigitalAll,
0
DigitalRed, -64〜 64
DigitalRed, 0
DigitalBlue -64〜 64
DigitalBlue 0
0.45, 0.5, 0.55, 0.6, 0.65,
0.45
0.75, 0.8, 0.9, 1.0
Off, Gamma, LUT
Off
Red, Green, Blue
Red
0〜256
0
0〜4095
Gamma=1.0
Configure analog control settings.
Select the gain to configure.
(DigitalRed and DigitalBlue are color model only)
Set the gain value for the gain setting selected in [GainSelector].
(DigitalRed and DigitalBlue are color model only)
Enable/disable gain auto adjustment.
[Once] automatically changes to [Off] when the signal level converges once.
Enable/disable auto white balance.
[Setting range]
0:Off, 1:Once, 2:Continuous,
5:Preset 3200K, 6:Preset 5000K, 7:Preset 6500K, 8:Preset 7500K,
Select the area for which to configure [AWBAreaEnable].
[Setting range]
0:Low Right,
1:Low Mid-Right,
4:Mid-Low Right, 5:Mid-Low Mid-Right, 6:Mid-Low Mid-Left,
8:Mid-High Right, 9:Mid-High Mid-Right, 10:Mid-High Mid-Left, 11:Mid-High Left
12:High Right,
13:High Mid-Right,
Enable/disable the photometry area selected in [AWBAreaSelector].
True: Operate AWB with all areas designated as photometry areas, regardless of the
individual enabled/disabled photometry area states configured in [AWBAreaSelector].
False: Operate AWB according to the individual enabled/disabled photometry area states
configured in [AWBAreaSelector].
Set the response speed for AWB adjustment. (8 is the fastest.)
Displays the operation status of the AWB.
[Operation status]
Complete, TooBright, TooDark, Timeout, Executing, TriggerError,
Convergent, ConditionError, Idle
Select the black level to configure.
(
DigitalRed and DigitalBlue are color model only)
Set the black level value.
Set the gamma value.
Select the LUT mode.
Configure LUT settings.
Select the LUT channel to control. (color model only)
Set the LUT index table number.
Set the LUT value.
— 64 —
Go-X Series USB3 Vision I/F
Description
2:Low Mid-Left,
3:Low Left
7:Mid-Low Left
14:High Mid-Left,
15:High Left
Advertisement
Table of Contents
