Chunk Data Function
The Chunk Data function adds camera configuration information to the image data
that is output from the camera. Embedding camera configuration information in the
image data allows you to use the serial number of the camera as a search key and
find specific image data from among large volumes of image data. In addition, when
images are shot with a single camera in sequence under multiple setting conditions,
you can search for images by their setting conditions.
■ Configuring Chunk Data
1
Set [ChunkModeActive] to [True].
Caution
The Chunk Data function settings cannot be changed during image output. To change
the settings, stop Acquisition.
Non-Volatile Flash Memory
The camera has non-volatile memory for users to store data.
Refer to the technical note "Storing Data in On-Camera Flash Memory" for more information.
Note
JAI strongly recommends saving images to the PC or other storage location because
the non-volatile flash memory may not have enough memory size to store large data.
Storing Data in On-Camera Flash Memory
Technical notes
— 55 —
Go-X Series USB3 Vision I/F