IAI GOX-2402M-USB User Manual page 9

③ POWER/TRIG LED
Indicates the power and trigger input status.
LED status and camera status
LED Light
POWER/ （Lit amber）
TRIG LED
（Lit green）
（Blinking green）
④ DC IN/TRIG connector（6-pin round）
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
Compatible connectors
Camera side : HR10A-7R-6PB (73） （Hirose Electric or equivalent ）
Cable side : HR10A-7P-6S (plug) (Hirose Electric or equivalent ）
Pin No.
Input/Output
1 Power In
2
3
4 Out
5 Out
6 GND
Camera initializing.
Camera in operation.
During operation in trigger mode, trigger signals are
being input.
❖ The blinking interval is not related to the actual input interval of
the external trigger.
Signal
DC In
In Opto In +
In Opto In -
Opto Out +
Opto Out -
GND
Status
Description
DC 10 V ～ 25 V
— 9 —
Go-X Series USB3 Vision I/F