Feature Properties - IAI GOX-2402M-USB User Manual

Feature Properties

Item
a) DeviceControl
DeviceVendorName
DeviceModelName
DeviceManufacturerInfo
DeviceVersion
DeviceFirmwareVersion
DeviceFpgaVersion
DeviceSerialNumber
DeviceUserID
DeviceTLType
DeviceTLVersionMajor
DeviceTLVersionMinor
DeviceTLVersionSubMinor
DeviceGenCPVersionMajor
DeviceGenCPVersionMinor
DeviceCharacterSet
DeviceReset
DeviceRegistersEndianness
DeviceTemperatureSelector
DeviceTemperature(C)
Timestamp (ns)
TimestampReset
TimestampLatch
TimestampLatchValue (ns)
DeviceReset
UserDefinedValueSelector
UserDefinedValue
j) TransportLayerControl
PayloadSize
Setting range Default value
ー "JAI Corporation"
ー ー
ー See the possibilities
ー ー
ー ー
ー ー
ー ー
Any ー
4:USB3Vision
1
0
1
1
0
1:UTF8 1:UTF8
0:Little 0:Little
0:Mainboard 0:Mainboard
ー ー
ー 0〜922337203685477580
7
(maximum value of
signed 64-bit)
ー ー
ー ー
0〜9223372036854775807 0
(maximum value of signed
64-bit)
ー ー
0:Value1, 1:Value2
2:Value3, 3:Value4
4:Value5
48 〜 67109240 12288
Display/configure information related to the device.
Display the manufacturer name.
Display the model name.
Display the manufacturer information.
Display the hardware version.
Display the firmware version.
Display the FPGA version.
Display the device ID.
Set the user ID (16bytes) for the camera.
Select the area of the camera's interior for which to display the temperature
sensor's reading. (Fixed Mainboard)
Display the internal temperature (°C) of the camera.
Display the timestamp value. Resets to 0 when the signed maximum 64-bit
value is exceeded.
Forcibly sets the timestamp's count value to 0.
Sets the timestamp's count value to TimestampLatchValue.
Reset the device.
(After the camera receives this command, it returns an ACK response. Then,
execute reset.)
Display information on transport layer control.
Display the payload size. (Include ChunkData) (unit: bytes)
— 57 —
Go-X Series USB3 Vision I/F
Description