Table of Contents
Advertisement
120.9
28.1
16.0
30.7
76.5
186.5
Figure 2-4. Stack-Mounting the Adept SmartController EX Motion Controller
Memory Card
The Adept SmartController EX motion controller is equipped with a Secure Digital
memory card. The SD card is removable, and can be moved to another Adept SmartController
EX motion controller for testing.
The SD card shipped with all systems is factory-configured and installed by Adept. The SD
card stores the eV+ operating system, application programs, data files, and Adept licenses.
Only the SD card supplied by Adept will work with the Adept SmartController EX motion con-
troller.
NOTE: This SD card is not compatible with the SmartController CX or CS motion controllers.
Adept SmartController EX User's Guide, Rev.C
Chapter 2: Installation
2X 40356-00002
BOTH SIDES
8X M3 x 6MM
BOTH SIDES
155.8
CAUTION: Use suitable measures for eliminating electrostatic discharge
during removal and installation of the SD card. This includes, but is not
limited to, the use of a grounded wrist strap.
Page 19 of 96
328.9
™
(SD)
Advertisement
Table of Contents
