Table of Contents
Advertisement
DeviceNet is a low-cost communications link that connects industrial devices to a network
and eliminates expensive hard-wiring. The direct connectivity provides improved com-
munication between devices as well as important device-level diagnostics not easily available
using hard-wired I/O interfaces.
7.1 DeviceNet Specifications
Adept Technology is a member of the Open DeviceNet Vendor Association (ODVA), which is
independently run and operated and not directly associated with any one company. The
ODVA controls DeviceNet technical specifications with help from Special Interest Groups
(SIGs). Each SIG develops device profiles for one line of product features to ensure inter-
operability. These profiles become part of the technical specifications.
The DeviceNet Specification is divided into two volumes and defines the following elements:
Volume 1
DeviceNet Communication Protocol and Application (Layer 7 - Application Layer
l
Controller Area Network (CAN) and its use in DeviceNet (Layer 2 - Data Link Layer)
l
DeviceNet Physical Layer and Media (Layer 1 - Physical Layer)
l
Volume 2
Device profiles to obtain interoperability and interchangeability among like products
l
DeviceNet incorporates CAN, which defines the syntax or form of the data transmitted. The
DeviceNet application layer defines the semantics or meaning of the data transmitted. For
more information on the basics of a DeviceNet cable system, contact ODVA at:
ODVA Technology and Training Center
4220 Varsity Drive, Suite A
Ann Arbor, MI 48108-5006 USA
Phone Number: 1-734-975-8840
Fax Number: 1-734-922-0027
www.odva.org
1
These layers are based on the Open Systems Interconnect (OSI) model.
Chapter 7: Adept DeviceNet
Adept SmartController EX User's Guide, Rev.C
Page 85 of 96
1
)
Advertisement
Table of Contents
