Safety Precautions - adept technology SmartController EX User Manual

Motion controller
Table of Contents

Advertisement

NOTE: Notes provide supplementary information, emphasize a point or procedure, or give a tip
for easier operation.

1.3 Safety Precautions

All personnel who install, operate, teach, program, or maintain the system must read
l
this guide, read the
responsibilities in regard to the system.
All personnel who design the robot system must read this guide, read the
l
Safety
Guide, and must comply with all local and national safety regulations for the loca-
tion in which the system is installed.
The robot system must not be used for purposes other than described in the robot user's
l
guide. Contact Adept if you are not sure of the suitability for your application.
The user is responsible for providing safety barriers around the robot to prevent anyone
l
from accidentally coming into contact with the robot when it is in motion.
Chapter 1: Introduction
DANGER: This indicates an imminently hazardous electrical situation
which, if not avoided, will result in death or serious injury.
DANGER: This indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: This indicates a potentially hazardous electrical situation
which, if not avoided, could result in serious injury or major damage to
the equipment.
WARNING: This indicates a potentially hazardous situation which, if not
avoided, could result in serious injury or major damage to the equip-
ment.
CAUTION: This indicates a situation which, if not avoided, could result
in damage to the equipment.
DANGER: Adept robots can cause serious injury or death, or damage to
themselves and other equipment, if the following safety precautions are
not observed:
Adept Robot Safety
Adept SmartController EX User's Guide, Rev.C
Page 11 of 96
Guide, and complete a training course for their
Adept Robot

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdio

Table of Contents