The sDIO expansion module provides 32 optically-isolated digital inputs, 32 optically-isolated
outputs, and an IEEE 1394 interface.
6.1 Mounting the sDIO Module
The following mounting options are available for the sDIO module:
Rack mounting
l
Panel mounting
l
Table mounting
l
Stack mounting
l
NOTE: To maintain compliance with local and national standards, the mounting of the sDIO and
all terminations at the sDIO must be performed in accordance with those standards.
Rack-Mounting the sDIO Module
To rack-mount the sDIO module in a standard 19-inch equipment rack, you must first install
the mounting brackets on each side of the unit, as shown in the following figure.
NOTE: These brackets must be ordered separately. They do not come with the sDIO module.
Chapter 6: sDIO Module
Figure 6-1. sDIO Module
Adept SmartController EX User's Guide, Rev.C
Page 61 of 96