General Description - Centurion SMART GUARD air Operating Instructions Manual

General description

The CENTURION SMARTGUARDair is a durable, high quality
keypad designed to provide secure access control to
restricted areas. The weatherproof unit is wireless, and is
powered by two AA alkaline (penlight) batteries. When any
key is pressed, a backlight illuminates the keypad for ease of
use in low-light conditions.
Access is granted by the keying in of a valid access code.
The access code can vary from one to ten digits. Up to one
thousand different access codes can be stored within the
unit's non-volatile memory.
Each access code is stored in a location of the memory,
referred to as an 'address'.
New codes can be added and existing codes can be deleted
as required.
'Token codes' can be added, allowing only a preset number
of activations, after which the code automatically becomes
invalid.
Channel 3 is used as the Alarm Channel (refer to page 28)
and cannot be changed. If alarm functionality is required,
then it is advisable that Channel 3 is not assigned to any
other function.
Each code can activate one of fifteen channels built into the
SMARTGUARDair. A channel is very much the same as a
remote control button. Each channel can activate an external
CENTURION rolling code-compatible receiver, either stand-
alone, single channel, multichannel or integrated into
products such as the D5-Evo, D10, VECTOR2, etc.
page 2