Centurion SMART GUARD air Operating Instructions Manual page 35

Typical mounting instructions:
1. Remove retaining
screw cover and
screws.
2. Insert screwdriver
blade into groove
provided between the
cover and back panel.
Lever screwdriver
forward to separate
the cover from the
back panel.
3. Fix the self-adhesive
rubber pads into the
recesses provided on
the rear panel.
4. Attach the rear pane to
the mounting
surface/gooseneck with
the mounting screws
supplied.
Be sure to seal all
the mountings with
silicone sealant.
Use only the mounting holes shown. If the other
mounting holes are used, the mounting screws will
interfere with the batteries.
Retaining
screw cover
Mounting
screws
4
page 34
1
2
Self-adhesive
rubber pads
3