Setting The Security Parameters - Centurion SMART GUARD air Operating Instructions Manual

Setting the security parameters

The following procedure sets the conditions under which the
Alarm channel (Channel 3) will activate. This also sets the
Anti-default and Keypad Alarm Tone Mute features.
The following alarm conditions can be set:
Duress (Code + one)(Default=off)
Adding one to the last digit of an access code activates
the unit as normal, but also activates the alarm channel.
This is used if entering under duress.
E.g. If the access code is
3 5
1 2
Important when choosing an access code
number
Panic Alarm (
Pressing the
the Alarm channel.
Wrong Codes (Default=off)
When the number of wrong codes is exceeded, the Alarm
channel is activated.
Anti-default feature (Default=on)
To achieve greater security, this feature prevents the
system parameters from being reset by the defaulting
features.
gives access, but also activates the alarm.
If you intend using the Duress Security
Parameter, ensure that no consecutive numbers
are assigned as access codes.
Ensure that the desired code has not already
been allocated
+
and
1 2
)(Default=off)
#
#
keys simultaneously activates
page 24
3 4
, entering