How to use this Guide
The procedures in this Guide require the user to perform
certain sequential actions on the SMARTGUARDair keypad.
To assist you, the combined state of the three LED indicators
on the keypad correspond with particular steps within a
procedure. When carrying out the procedures, please be
aware of the following:
The factory default Master Code (
throughout this Guide as an example only. Refer to page 6
for instructions on how to change the Master Code.
Indicates a particular key to be pressed on the keypad
1
by the user
Indicates a lit LED
[ ] Indicates optional entries. If no variable is entered, the
system will use the default for the particular function,
where applicable
1 2
page 1
is used
3 4