Changing The Master Code - Centurion SMART GUARD air Operating Instructions Manual

Changing the Master Code

The following procedure will enable the user to change the
default Master Code
Master Code to a new Master Code. The Master Code may
also be learned into the system by following the procedure
on page 12, 'Adding a New User'.
The Master Code must always be stored at address
The Master Code can be used as a normal access
code and can be up to ten digits long
Enter the following keystrokes:
1. Enter Program Mode
2. Select KwikLearn
3. Enter address
4. Enter new code
1
Default Master Code=
Example: Replace the default Master Code
a new Master Code = 3\
Enter the following keystrokes:
1. Enter Program Mode
2. Select KwikLearn
3. Enter address
4. Enter access code
1 2 3 4 or the currently stored
Master Code
0
0
Master Code
1 2 3 4
3 7 8 1
1 2
0
0
3 7 8
page 11
Indicator LEDs
STANDBY
1
1 2
Indicator LEDs
STANDBY
3 4
1
0
3 4
with