Centurion SMART GUARD air Operating Instructions Manual page 24

Enter the following keystrokes:
1. Enter Program Mode
2. Select Key Wipeout Menu
3. Enter Key Wipeout Time [Seconds]
4. Exit Program Mode
If the Key Wipeout time is set to
will be disabled (only applicable to externally-
powered devices)
Disabling the Key Wipeout time will:
Compromise the security of the system
Cause a code entry to be incorrectly recognised as
a wrong code if an incomplete code was previously
entered
Master Code
5
page 22
Indicator LEDs
STANDBY
0
, Key Wipeout