Kwikpair - Centurion SMART GUARD air Operating Instructions Manual

KwikPair

The SMARTGUARDair must now be paired with a
CENTURION rolling code radio receiver.
1. Place the receiver into Learn Mode.
2. Enter a valid access code on the SMARTGUARDair,
followed by
The SMARTGUARDair will now transmit for a short
time, and will pair with the receiver.
Hash-Hold may be used (as described on page 4) to
extend the transmission time to suit the learning
procedure associated with certain types of receivers.
3. Exit Learn Mode on the receiver
4. Test the system by entering a valid access code,
followed by
.
.
page 9