Backing Up The Unit - Centurion SMART GUARD air Operating Instructions Manual

Backing up the unit

It is possible to back up all the user access codes as well as
the system settings to the optional Backup Memory Module
(PCA12201v1.0).
This allows the system to be easily restored in the unlikely
event of system failure.
Procedure for backing up the unit:
Remove power. Plug the Backup Memory Module into the
socket provided. Reapply power. All three LEDs will now
be ON.
Enter
The green LED will begin to flash, indicating that the
memory is being backed up. When the backup is
complete, a beep will be heard, and the green LED will
turn off. Remove the Backup Memory Module and keep it
in a safe place.
Backing up to a Backup Memory Module will
overwrite any information that was previously
contained in that Backup Memory Module
Master Code , then press
page 29
1
on the keypad.