General Use - Centurion SMART GUARD air Operating Instructions Manual

General use

After a user has been added to the SMARTGUARDair's
memory and the keypad has been paired with a compatible
rolling code receiver, access is granted by keying in a valid
#
code and confirming the entry with the # key.
2 9 8 5 6
For example, if the code is being used as
an access code, the user will enter the digits in sequence
and then press # . The green LED will illuminate briefly to #
indicate that a valid access code has been entered. Briefly
#
pressing the # key after a code has been entered will
cause the SMARTGUARDair to transmit a signal for a
minimum of 750ms (milliseconds). However, holding down
the # key will allow for a transmission of up to eight
#
seconds which will accommodate receivers requiring longer
transmission times. (This may be referred to as Hash-Hold.)
page 4