General Description; Icons Used In This Booklet - Centurion Vector2 Installation Manual

The Vector operator has been designed to safely and cost-effectively automate a wide variety of swing
gates, from single light domestic swing gates to heavy industrial double swing gates.
The fail-safe and fully redundant position and collision detection system has been designed and tested
to set the standard in safety of operation and to provide an unparalleled level of reliability and durability
in operation.
The gate travel limits are managed by a sealed double-redundant opto-electronic system that has been
designed not only to ensure ultra-reliable operation, but also to ensure precise position and trajectory
control. This enables very accurate and reliable collision detection to ensure safe operation even under
trying conditions.
The Vector control card has been designed to be easy and intuitive to use with helpful instructions on
the status of the operation during and after the installation. It also has a built - in diagnostic procedure
that can verify every aspect of the control card on site.
Some of the advanced features offered by the Vector controller are:
• Fully automated single button limit-setup for single and double swing gates.
• Full graphics LCD display provides an intuitive user interface with built - in diagnostics to speed up
and simplify the installation process.
• Separate safety inputs for sensitive edges or beams on both the closing and opening directions of
the gate.
• Advanced closed-loop speed control to maintain safe and reliable operation on inclined gates
under windy conditions.
• Fully configurable gate run profiles
• Selectable and adjustable auto-close with pushbutton override.
• Pedestrian (Partial) opening with automatic closure.
• Free exit input.
• Positive close mode.
• Multiple mode of operation.
• Solenoid lock drive output up to 2A.
• Holiday lockout.
• A status LED output to indicate the gate status remotely .
• Pillar light control
• Leaf delay selectable for either gate leaf.
• On-board NOVA receiving with selective add and delete of remotes.
Lightning Protection
The Vector electronic controller utilizes the same proven surge protection philosophy that is used in all
Centurion products. While this does not guarantee that the unit will not be damaged in the event of a
lightning strike or power surge, it greatly reduces the likelihood of such damage occurring. The earth
return for the surge protection is provided via the mains power supply earth. In order to ensure that the
surge protection is effective, it is essential that the unit is properly earthed.
Indicates tips and other information that could be useful during the installation.
Notes indicate variations and other aspects that should be considered during the installation.
Cautions are critical aspects that must be adhered to, to prevent personal injury .

General Description

General Description

Icons Used In This Booklet

Icons Used In This Booklet
Page 5