Restoring The Unit - Centurion SMART GUARD air Operating Instructions Manual

Restoring the unit

Restores all the user access codes as well as system
settings from the optional Backup Memory Module
(PCA12201v1.0).
Procedure for restoring the unit:
Remove power. Plug the Battery Backup Module into the
socket provided. Reapply power. All three LEDs will now
be ON.
Enter
keypad. The yellow LED will begin to flash, indicating
that the memory is being restored. When the memory
has been restored, a beep will be heard, and the yellow
LED will turn off.
Remove the Backup Memory Module and keep it in a
safe place.
Restoring from a Backup Memory Module will
overwrite any information that was previously
contained in the SMARTGUARDair unit
Master Code , then press
page 30
on the
3