Alarms - Centurion SMART GUARD air Operating Instructions Manual

Alarms

The SMARTGUARDair allows four different alarms to be set,
each of which will activate Channel 3, the designated Alarm
Output Channel.
The four alarms available on the SMARTGUARDair are as
follows:
Duress Alarm - a
adding one to the last digit of an access code
Panic Alarm - a settable alarm feature, activated by
pressing the
Multiple Wrong Codes Alarm - a settable alarm
feature; it is activated by exceeding the pre-set number
of allowable wrong codes
Anti-tamper Alarm - a non-settable alarm feature,
activated when the anti-tamper input is activated.
This alarm is always enabled and it is therefore
recommended that Channel 3 be used exclusively as an
Alarm Output Channel to ensure greater security
settable alarm feature, activated by
and # keys simultaneously
page 28