Fitting The Optional Anti-Tamper Switch - Centurion SMART GUARD air Operating Instructions Manual

Anti-tamper Switch
The Anti-tamper Switch input is a normally-open input.
In other words, the input must be tied to common to trigger
the Anti-tamper Alarm.
If the onboard terminals are used to connect the
anti-tamper switch, the switch's normally-closed
(N/C) and common connections MUST be used.
Normally-closed (N/C) will be connected to In1 and
COM to Neg (-)
If the anti-tamper switch is to be connected to a
third-party alarm system, either normally-closed or
normally-open can be used, along with a common
connection
Onboard
alarm option -
activates Alarm
Channel (Channel 3)
In1
2
To third party
alarm system
page 35
3
1