KwikLearn
The following KwikLearn procedure and connection diagrams
(see pages 35 and 36) will enable you to start using your
SMARTGUARDair system right away.
Add a new access code at a specified address.
The code will operate Channel 1 only.
Enter the following keystrokes:
1. Enter Program Mode
2. Select KwikLearn
3. Enter user address
4. Enter access code
1
Default Master Code=1234
The SMARTGUARDair will have to be paired to a
valid receiver before a code will be able to activate it.
Thus, the KwikLearn procedure will store a new code
in the keypad's memory, but the code will still have
to be associated with a receiver using either the
KwikPair facility described on page 9, or the Pairing
procedure on page 17.
Master Code
0
0
new access code
page 7
Indicator LEDs
STANDBY
1